CJP-35/A & 35/B ~ 35kV 600/900A
The CJP-35/A or CJP-35/B three phase cable junction pedestal direct buried series are made with fire retardant fiberglass and protected with UV stabilized gel coat . Optional 600/900A 15/25 kV 2/3-Way Cooper junctions with 6″ centers or 2/3/4-Way Elastimold junctions with 4″ centers are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Padmounted Enclosure Integrity Standard.
Our three phase direct buried CJP-35/A & CJP-35/B cable junction pedestal series that come with (6) Adj SS parking stands either above (CJP-35/A) or below (CJP-35/B) the junctions and are designed for the Windfarm / Solar markets and available in the following configurations/options;
-
-
- Design – Direct Buried
- Heights – 41”, 50”, & 56”
- Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- Parking Stands – (6) Adj SS parking stands below junctions
- Safety – Reflective smooth white gel coat interior finish for stickers to adhere to.
- Lifting – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- Optional Junctions – Cooper 2/3-Way 600/900A, 150kv or 200kV Bil, 35kV with 6″ centers (dwg #s 3394 & 3396)
- Optional Junctions – Elastimold 2/3/4-Way 600/900A, 150kv or 200kV Bil, 35kV with 4″ centers (Dwg #s 3393 & 3395)
- Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- Optional Ventilation Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each installed one each side of top
- Optional Extension Sleeves – 18″H (Dwg #s 3393 & 3394) or 34″H (Dwg #s 3395 & 3396)
- Optional Cable Support – Stainless Steel unistrut
- Optional Cable Clamps – Stainless Steel camps available in various diameters
-